A1 part post!

Discussion in 'Modding and Customization' started by aoneguy, Sep 9, 2009.

  1. aoneguy

    aoneguy

    Joined:
    Aug 16, 2008
    Messages:
    8
    Likes Received:
    0
    Hi I hope someone can help me or has experinced the same. I was installing windows XP and came across an error- some file not loaded. After retrying a couple times I gave up and switched everything off. When I turned my A1 on again to try install it began to post but it now hangs at the opening screen. Bios build, ram and then ssd is shown but nothing else happens. F2 & F12 are also available but when I select either one it shows ''please wait'' . ........................... indefinitely.

    Please help!

    anyone !

    Things I've tried so far include:- installing with usb cd rom; installing with a usb stick; removing the hard drive-for the purpose of getting in to the bios setup! nothing has worked so far!

    At this point any advice is welcome!

    Cheers
     
    aoneguy, Sep 9, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.