AO-SSD and Runcore

Discussion in 'Modding and Customization' started by frozenport, Jan 2, 2010.

  1. frozenport

    frozenport

    Joined:
    Jan 2, 2010
    Messages:
    1
    Likes Received:
    0
    Hello,

    I procured a 32GB Runcore SSD and it seems, consistently, unwilling to let Windows 7 install - despite the USB operation being fully functional. Furthermore, cloning the drive does not work as the boot process hangs on CLASSPNP.SYS. Windows XP install blue screens giving Session3_Initialization_Failed.

    It seems as though the drive is inaccessible to the installation - with the install failing consistantly at the expanding step (1% complete). Thereafter, Windows setup is unable to detect the drive. I was wondering if there is something special that must be done to install Windows 7 on a RunCore 32GB?

    My searching on the internet has yielded dissatisfactory results: the only method being an imaging from USB that several people claim causes frequent analogs to the BSOD.
     
    frozenport, Jan 2, 2010
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Runcore SSD

  2. RUNCORE SSD - ZIF connector

  3. RunCore 16GB Pro PATA Mini Zif

  4. 1.8" Toshiba or wait for RunCore

  5. Does the runcore ssd work?

  6. AAO D250 + RunCore Pro IV SSD problems

  7. Aspire One ZG5 Runcore Pro IV

  8. AOA110 AOA150 zg5, sata ssd AHCI, bcm70012 and usb wifi PCI-e trail and error

Loading...