Booting from USB drive system hangs

Discussion in 'Windows' started by Swedenborg, Sep 5, 2008.

  1. Swedenborg

    Swedenborg

    Joined:
    Aug 28, 2008
    Messages:
    2
    Likes Received:
    0
    Hi, i got a Acer Aspire One 150 and recently installed Windows XP PRO SP3 with my USB drive successfully everything seems to be fine i used this guide: http://www.eeeguides.com/2007/11/instal ... thumb.html

    But i wanted to try do a nlite and used this tutorial: http://wiki.eeeuser.com/howto:nlitexp
    I followed allmost all the steps in this tutorial (except the "Manual Install and Upgrade" thing) however I have this problem

    I choose to boot from USB drive and i think i does and choose the text mode portion setup (I have also tried the gui) the screen turns black with the blinking cursor in the higher left corner and then turns black and hangs i have waited about 10 minutes and nothing happens

    Does anyone knows what could be the problem and how can I fix it ?
     
    Swedenborg, Sep 5, 2008
    #1
  2. Swedenborg

    goofball

    Joined:
    Aug 23, 2008
    Messages:
    710
    Likes Received:
    0
    rebuild the key, I'm pretty sure I ran across this as well and had to rebuild the key.
     
    goofball, Sep 6, 2008
    #2
  3. Swedenborg

    Swedenborg

    Joined:
    Aug 28, 2008
    Messages:
    2
    Likes Received:
    0
    Im not sure if this is a stupid question but what key do i need to rebuild?
     
    Swedenborg, Sep 6, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.