capacitive stylus on resistive screen?

Discussion in 'Modding and Customization' started by funkydude101, May 27, 2009.

  1. funkydude101

    funkydude101

    Joined:
    May 17, 2009
    Messages:
    3
    Likes Received:
    0
    This stylus mount would work perfectly underneath on the right side along the ridge of the 8.9" a1

    http://www.dealextreme.com/details.dx/sku.18827

    [​IMG]

    However I don't know if that stylus would be effective on a resistive touch screen...

    any thoughts?
     
    funkydude101, May 27, 2009
    #1
  2. funkydude101

    nmesisca

    Joined:
    Oct 6, 2008
    Messages:
    318
    Likes Received:
    0
    Location:
    Ireland
    resistive works with ANYTHING really. from a finger to a piece of wood.
    its based on pressure so as long as you exercise some on the screen, it will work.
     
    nmesisca, May 27, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Make the screen resolution; so I can fit more on the screen?

  2. Epson Stylus Colour D92 Driver

  3. Touchscreen + internal (retractable) Stylus mod

  4. Screen flickers when firefox or IE is open in full screen

  5. Screen Issue on Aspire One 10.1" Screen

  6. Internal Stylus installation 8.9 Aspire One

  7. Blank screen (but moveable cursor) after Acer screen bootup

  8. laptop with fine tip stylus for taking notes

Loading...