Different Displays in AA1? Survey!

As i already mentioned a few days ago here: http://macles.wordpress.com/2008/07/22/ ... -displays/ the AA1 might be shipping with different displays. Now that we know that they put two different SSDs and batteries in there anyhting is possible.

So please check your display by using the entering the following command in the terminal (Alt+F2, click Run in terminal, but don't enter anything on the box): cat /var/log/Xorg.0.log which will flood the terminal with lots of information and at the end you will see this.


(II) intel(0): Manufacturer: AUO Model: 11c2 Serial#: 0
(II) intel(0): Year: 2008 Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max H-Image Size [cm]: horiz.: 20 vert.: 11
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.573 redY: 0.339 greenX: 0.330 greenY: 0.596
(II) intel(0): blueX: 0.142 blueY: 0.103 whiteX: 0.310 whiteY: 0.330
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 50.4 MHz Image Size: 195 x 113 mm
(II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) intel(0): v_active: 600 v_sync: 603 v_sync_end 604 v_blanking: 625 v_border: 0
(II) intel(0): AUO
(II) intel(0): B089AW01 V1
(II) intel(0): EDID (in hex):
[...]
(II) intel(0): EDID vendor "AUO", prod id 4546
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
(II) intel(0): EDID vendor "AUO", prod id 4546
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)

Who knows, maybe someone will have the CMO one.

 

How to for windows?
I'll try look in device manager, thats always a good place to start looking for part numbers
Rory

 

Just checked my linpus version, purchased at Canada Computers on Sunday. The bold lines (and perhaps the others) are identical on my box.

 

In Device Manager on Vista, I've got 3 displays installed, I think because I have installed the drivers 3 times lol.
Anyways on the properties page for one, and the Details tab, under "Hardware Ids", I have "Monitor\AUO11C2"
I've checked all the other options, but can't find anything that isn't generic..
Rory