Display set to 1024 x 768 not 1024 x 600

Discussion in 'Laptop Hardware' started by typeguy, Dec 1, 2009.

  1. typeguy

    typeguy

    Joined:
    Dec 1, 2009
    Messages:
    1
    Likes Received:
    0
    Hello All,

    I have an Aspire One D150-1165 that was working fine. One day when I turned it on the display was set to 1024 x 768 and filling only about half the screen. I performed a Full System Recovery to factory defaults and that didn't help.

    I also pulled the battery out, held the power button down for 30 seconds and then plugged in the power adapter (as per Acer online help). It worked and the video was back to 1024 x 600 but when I shutdown and restarted it came back in 1024 x 768 mode.

    BTW, when I enter the BIOS the display is full screen and normal (for the BIOS).

    Any ideas or suggestions? Any help would be appreciated.

    Oh the specs are D150-1165, WinXP Home, 160GB HD, 1GB RAM. Very standard.

    hf2
     
    typeguy, Dec 1, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cant get 1280*1024 at my external display

  2. Can't get full 1280*1024 at my external display with windows

  3. Display toggle & external display not working

  4. Huge collection of 1024 by 600 Wallpapers

  5. SwitchResX 1024 x 768 ?

  6. 1024 X 600 to 1024 X 768 or higher

  7. Acer Aspire one 751 with Ubuntu and 1366 x 768 resolution

  8. Acer Aspire one 722 -> Screen Resolution 1366 x 768

Loading...