Ethernet Connectibility after BIOS reload

Discussion in 'Acer Aspire One' started by starroamer2010, Mar 21, 2010.

  1. starroamer2010

    starroamer2010

    Joined:
    Mar 19, 2010
    Messages:
    1
    Likes Received:
    0
    I recently did a BIOS reload after my Acer Aspire One crapped out. Now I can not connect to the internet thru the Ethernet connection. The light is on when cable is connected, the system says I am connected in the "Connect to" window, I appear to be receiving but nothing gets sent and no website will load. Received is a constant zero.

    Does anyone know what to do to fix this problem so I can connect to the internet thru the Ethernet connection? Hoping it is a simple "Oh, that" type of fix.

    Thanks, everyone.

    Tom Kennedy / starroamer2010
    Louisville, KY USA :)
     
    starroamer2010, Mar 21, 2010
    #1
  2. starroamer2010

    Swarvey Moderator

    Joined:
    Dec 3, 2009
    Messages:
    1,145
    Likes Received:
    0
    Have you tried uninstalling, then reinstalling the hardware connection in the Device Manager? I've had to do this with a few different types of hardware to get them working after similar failures.

    Uninstall
    Reboot
    Allow Windows to reinstall the device
     
    Swarvey, Mar 21, 2010
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Slow Ethernet/LAN data throughput

  2. Problems using ethernet

  3. No Wifi, but Ethernet works fine?

  4. Are there simple steps for XP SP3 repair or reload?

  5. Acer Aspire One Wifi and ethernet gone after drop - SORTED!

  6. Purchased used D150...Cannot reload due to BIOS pw. Pls Hlp!

  7. D150 doesn't want to boot or reload windows

  8. Acer Aspire One clean + reload ?

Loading...