HOW TO: Install OS X From USB Flash Drive or HDD Using XP

Thanks a lot. I am downloading it...but it says it will take 11 weeks to complete the download!!! Hopefully it will take less

 

Hehe! sorry but I cannot upload 24/24 hours! I upload 6-7 hours per day at 942 kb/s [NEW RECORD] so.. when you'll finish to download the file, please leave it in upload!

torrent also uploaded on:

monova
sumotorrent
seedpeer
mininova
idealtorrent

 

Thanks stefanello for the help. But the problem is not getting iAtkos on a USB (Because this is 3 or 4 threads on how to do that), but the problem is getting iDeneb onto a USB. There is just to much steps to install iAtkos. The end resluting OS, iDeneb takes the cake.

So the Problem remains the same, trying to get iDeneb on to USB

 

I finally succeded installing iAtkosv5 without an external DVD. I followed the instructions on this thread but it was not that easy. I couldn't boot the installation flashdisk. First I tried with a 8GB flash disk but it never worked. Then I tried with an external HDD and it worked but it cost me a lot to set ID=AF with diskpart. It never worked when I tried to do it from the AspireOne booted with XP so I connected the external HDD to another computer with Vista where I made the change to AF. After that it was quite easy following instructions from here: http://www.insanelymac.com/forum/index. ... 5&t=153352

Now I want to change to voodoo kernel and find a solution for the WLAN card (change it to Dell 1390 or make it work).

 

Has anyone got iDeneb 1.4 onto USB drive?

 

Ok, for all the people how can't pass trought this step, and giving this error:

Image file:F:\iATKOS_5i.iso
Type: iso/hfs.
File size:2831122432 Bytes
Image size:2830565375 Bytes
Driver d: not empty,try another!
Dump image file to driver,please wait...
Change partition type to AF: not a HFS partition
Load boot1h: not a HFS partition
Load startupfile: not a HFS partition
Add boot.ini menu: Success
All done, have fun!

That's because we were using a 64bits windows. I tried again with a 32bits windows and it works at the first time!

 

I had problems with iDeneb too. I bought a 4GB flash drive especially and then found that the image was bigger *slaps forehead*. Going to try iAtkos when I finish work, left it copying to the drive using Leopard Helper when I left this morning.

 

...how can we "select the disk and partition" if windows doesnt recognize the mac file system?...i suppose you could use something like mac drive but still...

 

any chance of a reup of the link in the first post?