Huawei E176 and linpus

Discussion in 'Networking' started by schmadde, Sep 23, 2009.

  1. schmadde

    schmadde

    Joined:
    Jul 24, 2008
    Messages:
    22
    Likes Received:
    0
    I am currently shopping for an umts usb modem and one of the most likely candidates is the T-Mobile web'n'walk stick IV - a rebranded Huawei E176. Does anybody know if it works with my aspire one A110L and the stock linpus? Failing that, any recommendations for a cheap (around 60€ new) modem with HSUPA and external Antenna support?
     
    schmadde, Sep 23, 2009
    #1
  2. schmadde

    Japser

    Joined:
    Aug 28, 2008
    Messages:
    267
    Likes Received:
    0
    Japser, Sep 23, 2009
    #2
  3. schmadde

    schmadde

    Joined:
    Jul 24, 2008
    Messages:
    22
    Likes Received:
    0
    Thanks. I already read this page on my research before posting, but somehow missed the part about AAO and linux. I hope the meant linpus and not some other distribution (support exists in Ubuntu as I learned, but it boots much too slow for my taste).

    I will report success or failure if I get my hands on the device.
     
    schmadde, Sep 23, 2009
    #3
  4. schmadde

    schmadde

    Joined:
    Jul 24, 2008
    Messages:
    22
    Likes Received:
    0
    Yesterday I got my sim card and tried. It worked - sort of. Certainly not the way I would like it. It was detected, I entered all my data and upon clicking "connect" it stayed there forever. But a 3G connection was established and I was able to transfer data. Mobile Partner was still display the dialog and not reacting to anything but a click on the "Cancel" Button. There was some linux software on the data partition of the Huawei Stick, but I couldn't find a way to configure it.

    Does anybody have some hints on how to debug it? What does Mobile Partner do after all? Is it just a wrapper around standard system programs (such as pppd) or does it establish the connections all of its own?
     
    schmadde, Oct 6, 2009
    #4
  5. schmadde

    Japser

    Joined:
    Aug 28, 2008
    Messages:
    267
    Likes Received:
    0
    I would try using wvdial.

    sudo wvdialconf

    lets you create a configuration in /etc/wvdial.conf .

    Then

    sudo wvdial

    should make the connection.

    ( And with proper permissions ( group 'uucp' ? ) it should be possible to do this without sudo. )

    --Japser.
     
    Japser, Oct 6, 2009
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.