Install Windows 7 using a bootable USB flash drive

There's also another thing that may not have been mentioned. Using the terminal to partition your USB drive will only work in Vista as the partitioning tool needed only exists in Vista and not in XP. Although you could use GParted (from the Ubuntu Live CD) to partition and reformat your flash drive if you wanted.

I prefer not to copy and paste someone else's instructions since several others have done so the last page. Using command line/terminal is not something everyone is accustomed to, so using the Windows GUI (albeit a little longer of a process) to achieve the same thing might appeal to less advanced users.

I tend to type my own instructions since I recall from memory / repeated usage. If I had to quote someone else's instructions, then I'd link to them instead of wasting space here.

 

Now I followed the install process, formatted my USB drive and tried to install onto my One, but I only had 8 GB available and the install requested more, around 8.7 GB. Anyone have any suggestions on how to get the OS on to an 8 GB sdd.

Another issue, deleted the partition table and trying to restore them is not easy. I am in linux until that works out.

 

I usually consider myself fairly well rounded when it comes to OS/software installation, especially when there are step by step instructions....... However, this W7 installation is giving me the blues. I successfully created the bootable USB and created a new NTFS partition via PQ Partition Magic 8 but am unable to complete the W7 installation beyond selecting the partition. Each time I get the following error: Setup was unable to create a new system partition or locate an existing system partition.

I have reformatted, deleted, created new partitions leaving unallocated space and rebooted the system between each attempt without any satisfactory results. Any help would be highly appreciated.

AOA 150-1864
120GB
Upgraded to 1.5GB RAM (1GB Ramaxel PC26400)
2GB MicroSD w/SD & USB Adapter
Belkin Neopren Carrying Pouch (only if it had a handle)
Contemplating (WiFi 5100, Ebay Carrying Case, Screen & Keyboard Protector)

3/16/08 (Update)
Well, I finally have W7 installed. I wasn't able to figure out the issues I was having with Build 7000, however Build 7048 installed with only one hiccup. I had to reset the UpperFilters in the Registry to satisfy an error of not being able to update the computer's boot configuration.

 

Guys,

I use this guide with sucessfully

http://www.blogsdna.com/2016/how-to-ins ... so-dvd.htm

 

Hello- can anyone tell me how to get my acer one with linux (xfce) converted back to windows ntfs? I have created my windows 7 usb drive, boots, try to install but my 8gb ssd drive is formatted in linux (ext3? i think) therefore, it seems windows cant "read" that drive...

please advise-- I am happy to reformat- dont need any current data however it doesnt seem to want to do that even.

thanks!

 

Hello!

I am using an AA1 with the 8GB SSD, 512MB RAM, shipped with Linux (removed) ...

I have had no trouble getting the Win 7 files onto a bootable USB, booting my AA1, and beginning the install process.

Everything works fine right up to the stage of the install where it starts copying the windows files (in fact the step is labeled "Copying Windows Files"). The progress "dots" ( . . . ) start to appear, and progress reads 0%.

All of a sudden, the install hangs, mouse pointer freezes, SSD light stays on solid, and the system stays locked there ... until I force a shut-down. Have tried the install five or six times, and each time I get a hang at the exact same stage.

Any suggestions or others with similar experience?

I have read through many of the forums, but have not yet seen anyone say they experienced lock-ups during the actual Win 7 install once it was running.

HELP??

 

You could use GParted and format to ntfs from a Linux liveCD. Or try to install Vista on to the SSD first and then see if you're able to install W7 over it if the first option doesn't help. Perhaps not the best and quickest solution, but this method has helped me earlier.

 

I had the same problem with the SD model when copying large files. Your SSD's read/write speed is probably either too slow or your RAM is insufficient for this kind of task. A minimum of 1 Gb of RAM is also required, btw, for Windows 7 so you might want to upgrade your 110L model if you're planning on installing W7.

 

I just put the cd contents onto the usb popped it in and ran it. Make sure the usb is NTFS format. I did it on an AAO aoa150.

 

Hi guys, I don't know if it has been mentioned in this thread, but since it's a stick I thought I would post a link to Microsoft's bootable usb tool. If you download an ISO from the microsoft store of windows 7, or did what I did and downloaded an iso via the MSDN network through my university, this tool will write the iso onto the usb just like all of the 3rd party programs. I used it on my aspire one and it all works well. I know that some of you will prefer the 3rd party utilities still, but some folks will appreciate an authorized option from microsoft.

Link-http://store.microsoft.com/Help/ISO-Tool

 

I used that utility and it worked flawlessly!

 

where can i find the iso files? i have a legit cd key, i paid for but i'm completely lost trying to do this. i desperately want 7 though. anyone know of a link to download the iso? otherwise how do i make one from the windows 7 disc?

EDIT: i have the iso. now whats the easiest way to install? can i just run deamontools and fire up the cd? or do i have to do more?

 

If you own a CD and wanted to use the Microsoft tool. I would use a tool like WinISO and make an ISO Image of your Win7 DVD. That way You know your CD-KEY will work. use the Microsoft tool to make the Bootable USB drive with Your Image. (PS. your thumbdrive will geet formated. take your data off it first)

 

After install Windows 7 to AOA-150, can I recovery Windows XP back to my laptop by HIDDEN PARTITION built in local HDD :?:
THANKS!

 

No, because the D2D recovery partition is accessable only by a special MBR (Master boot record) which will be over written by any later OS installs.

Image the entire hard drive to a USB drive with Acronis before installing Win 7.

 

Really? Interesting....

 

So, if I'm going to make a image of driver C by Acronis Backup & Recovery, I can "save" the hidden recovery partition's functions?

 

Hey I am trying to install windows 7 ultimate and I have been stuck at the "Windows is finalizing your settings" for over 3 hours, and sometimes the computer goes into sleep mode if I don't move the mouse after a while. I unplugged the usb flash drive. Any other tips? When I turn it off by holding the power button for several seconds, and then turn it back on, it resumes the finalizing settings screen.

Thanks!

 

anybody having problems with installing windows 7 on there netbook pm me and tell what the problem and i will try to help you

 

You might want to ditch VLite and replace it with RT7Lite. I've found that it's a better fit for working with Win 7 images. Vlite just didn't cut it for me, but RT7Lite got my OS the way I wanted it with very little hassle.