I've just switched to Ubuntu

After a enjoyable several months of Linpus I thought I would try the netbook remix version of Ubuntu

So far I've been impressed, the Interface is easy to use, and the load time is quick.

The only issue I've had so far - is that occasionally the wifi doesn't work and I have to delete the connection and recreate it, it's strange it's only every so often. Does anyone have a similar problem.

Cheers
John M

 

I had such a problem when I was running Ubuntu 8.10 but I haven't experienced it with 9.04 UNR.

I solved the 8.10 problem by replacing the standard Network Manager with wicd.

 

What version of ubuntu are you using?

type dmesg in a terminal and post the out put here for me.

 

Install Sickboy's kernel or blacklist "acer_wmi". That should do it,

 

Hi all thanks for all your help.

The connection issue hasn't happened since I first posted but I'm keen to make sure that I've got everything set up right.
I have installed the fix to make the Wifi LED work - I don't know if that will have made a difference.

I'm running Ubuntu 9.04 Netbook remix edition.

I'll blacklist acer_wml to see if that solves future issue.

The output from dmesg is massive but I'll post it below - once again thanks for your help.


[ 0.637662] ACPI: EC: Look up EC in DSDT
[ 0.644251] ACPI: BIOS _OSI(Linux) query ignored
[ 0.645635] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.144014] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 1.146820] ACPI: Interpreter enabled
[ 1.146828] ACPI: (supports S0 S3 S4 S5)
[ 1.146868] ACPI: Using IOAPIC for interrupt routing
[ 1.155308] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.155314] ACPI: EC: driver started in poll mode
[ 1.155639] ACPI: No dock devices found.
[ 1.155662] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.155795] pci 0000:00:02.0: reg 10 32bit mmio: [0x38480000-0x384fffff]
[ 1.155804] pci 0000:00:02.0: reg 14 io port: [0x60c0-0x60c7]
[ 1.155812] pci 0000:00:02.0: reg 18 32bit mmio: [0x20000000-0x2fffffff]
[ 1.155821] pci 0000:00:02.0: reg 1c 32bit mmio: [0x38500000-0x3853ffff]
[ 1.155863] pci 0000:00:02.1: reg 10 32bit mmio: [0x38400000-0x3847ffff]
[ 1.155992] pci 0000:00:1b.0: reg 10 64bit mmio: [0x38540000-0x38543fff]
[ 1.156052] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.156060] pci 0000:00:1b.0: PME# disabled
[ 1.156137] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.156144] pci 0000:00:1c.0: PME# disabled
[ 1.156223] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.156230] pci 0000:00:1c.1: PME# disabled
[ 1.156309] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.156317] pci 0000:00:1c.2: PME# disabled
[ 1.156400] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.156408] pci 0000:00:1c.3: PME# disabled
[ 1.156481] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
[ 1.156553] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
[ 1.156624] pci 0000:00:1d.2: reg 20 io port: [0x6040-0x605f]
[ 1.156695] pci 0000:00:1d.3: reg 20 io port: [0x6020-0x603f]
[ 1.156770] pci 0000:00:1d.7: reg 10 32bit mmio: [0x38544400-0x385447ff]
[ 1.156823] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.156831] pci 0000:00:1d.7: PME# disabled
[ 1.157011] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 1.157019] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 1.157078] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 1.157090] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 1.157101] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 1.157111] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 1.157123] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
[ 1.157153] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.157160] pci 0000:00:1f.2: PME# disabled
[ 1.157229] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
[ 1.157329] pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
[ 1.157338] pci 0000:00:1c.0: bridge 32bit mmio: [0x37300000-0x383fffff]
[ 1.157350] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x30000000-0x30ffffff]
[ 1.157422] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
[ 1.157454] pci 0000:02:00.0: reg 18 64bit mmio: [0x31010000-0x31010fff]
[ 1.157477] pci 0000:02:00.0: reg 20 64bit mmio: [0x31000000-0x3100ffff]
[ 1.157492] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 1.157511] pci 0000:02:00.0: supports D1 D2
[ 1.157515] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.157524] pci 0000:02:00.0: PME# disabled
[ 1.157611] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
[ 1.157620] pci 0000:00:1c.1: bridge 32bit mmio: [0x36300000-0x372fffff]
[ 1.157631] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x31000000-0x320fffff]
[ 1.157711] pci 0000:03:00.0: reg 10 64bit mmio: [0x35200000-0x3520ffff]
[ 1.157854] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 1.157862] pci 0000:00:1c.2: bridge 32bit mmio: [0x35200000-0x362fffff]
[ 1.157874] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x32100000-0x330fffff]
[ 1.157958] pci 0000:04:00.0: reg 10 32bit mmio: [0x34100300-0x341003ff]
[ 1.158043] pci 0000:04:00.0: reg 30 32bit mmio: [0xffff8000-0xffffffff]
[ 1.158172] pci 0000:04:00.2: reg 10 32bit mmio: [0x34100200-0x341002ff]
[ 1.158373] pci 0000:04:00.3: reg 10 32bit mmio: [0x34100100-0x341001ff]
[ 1.158575] pci 0000:04:00.4: reg 10 32bit mmio: [0x34100000-0x341000ff]
[ 1.158768] pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
[ 1.158776] pci 0000:00:1c.3: bridge 32bit mmio: [0x34100000-0x351fffff]
[ 1.158788] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x33100000-0x340fffff]
[ 1.158864] pci 0000:00:1e.0: transparent bridge
[ 1.158915] bus 00 -> node 0
[ 1.158930] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.159573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 1.160061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 1.160381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 1.160690] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 1.160995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 1.167220] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.167497] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.167771] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.168056] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.168331] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.168612] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.168887] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.169163] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.169686] ACPI: WMI: Mapper loaded
[ 1.169809] SCSI subsystem initialized
[ 1.169809] libata version 3.00 loaded.
[ 1.169809] usbcore: registered new interface driver usbfs
[ 1.169809] usbcore: registered new interface driver hub
[ 1.169809] usbcore: registered new device driver usb
[ 1.169809] PCI: Using ACPI for IRQ routing
[ 1.176022] Bluetooth: Core ver 2.13
[ 1.176063] NET: Registered protocol family 31
[ 1.176063] Bluetooth: HCI device and connection manager initialized
[ 1.176063] Bluetooth: HCI socket layer initialized
[ 1.176063] NET: Registered protocol family 8
[ 1.176063] NET: Registered protocol family 20
[ 1.176082] NetLabel: Initializing
[ 1.176085] NetLabel: domain hash size = 128
[ 1.176089] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.176119] NetLabel: unlabeled traffic allowed by default
[ 1.176151] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.176161] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.180114] AppArmor: AppArmor Filesystem Enabled
[ 1.184024] Switched to high resolution mode on CPU 0
[ 1.184338] Switched to high resolution mode on CPU 1
[ 1.188024] pnp: PnP ACPI init
[ 1.188048] ACPI: bus type pnp registered
[ 1.190126] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 7 (0x1000-0x1fff), disabling
[ 1.191429] pnp: PnP ACPI: found 9 devices
[ 1.191434] ACPI: ACPI bus type pnp unregistered
[ 1.191440] PnPBIOS: Disabled by ACPI PNP
[ 1.191460] system 00:01: ioport range 0x200-0x20f has been reserved
[ 1.191467] system 00:01: ioport range 0x600-0x60f has been reserved
[ 1.191473] system 00:01: ioport range 0x610-0x610 has been reserved
[ 1.191479] system 00:01: ioport range 0x800-0x80f has been reserved
[ 1.191485] system 00:01: ioport range 0x400-0x47f has been reserved
[ 1.191491] system 00:01: ioport range 0x500-0x53f has been reserved
[ 1.191499] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.191505] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.191521] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 1.191528] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 1.191534] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 1.191541] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
[ 1.191547] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.226481] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 1.226489] pci 0000:00:1c.0: IO window: 0x5000-0x5fff
[ 1.226500] pci 0000:00:1c.0: MEM window: 0x37300000-0x383fffff
[ 1.226508] pci 0000:00:1c.0: PREFETCH window: 0x00000030000000-0x00000030ffffff
[ 1.226523] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 1.226529] pci 0000:00:1c.1: IO window: 0x3000-0x4fff
[ 1.226538] pci 0000:00:1c.1: MEM window: 0x36300000-0x372fffff
[ 1.226546] pci 0000:00:1c.1: PREFETCH window: 0x00000031000000-0x000000320fffff
[ 1.226558] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 1.226565] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 1.226574] pci 0000:00:1c.2: MEM window: 0x35200000-0x362fffff
[ 1.226582] pci 0000:00:1c.2: PREFETCH window: 0x00000032100000-0x000000330fffff
[ 1.226595] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
[ 1.226601] pci 0000:00:1c.3: IO window: 0x1000-0x1fff
[ 1.226611] pci 0000:00:1c.3: MEM window: 0x34100000-0x351fffff
[ 1.226619] pci 0000:00:1c.3: PREFETCH window: 0x00000033100000-0x000000340fffff
[ 1.226631] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 1.226635] pci 0000:00:1e.0: IO window: disabled
[ 1.226643] pci 0000:00:1e.0: MEM window: disabled
[ 1.226650] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.226677] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.226687] pci 0000:00:1c.0: setting latency timer to 64
[ 1.226703] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.226711] pci 0000:00:1c.1: setting latency timer to 64
[ 1.226726] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.226734] pci 0000:00:1c.2: setting latency timer to 64
[ 1.226748] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.226756] pci 0000:00:1c.3: setting latency timer to 64
[ 1.226769] pci 0000:00:1e.0: setting latency timer to 64
[ 1.226776] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.226781] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.226786] bus: 01 index 0 io port: [0x5000-0x5fff]
[ 1.226791] bus: 01 index 1 mmio: [0x37300000-0x383fffff]
[ 1.226796] bus: 01 index 2 mmio: [0x30000000-0x30ffffff]
[ 1.226800] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.226805] bus: 02 index 0 io port: [0x3000-0x4fff]
[ 1.226810] bus: 02 index 1 mmio: [0x36300000-0x372fffff]
[ 1.226815] bus: 02 index 2 mmio: [0x31000000-0x320fffff]
[ 1.226819] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.226823] bus: 03 index 0 io port: [0x2000-0x2fff]
[ 1.226828] bus: 03 index 1 mmio: [0x35200000-0x362fffff]
[ 1.226833] bus: 03 index 2 mmio: [0x32100000-0x330fffff]
[ 1.226837] bus: 03 index 3 mmio: [0x0-0x0]
[ 1.226842] bus: 04 index 0 io port: [0x1000-0x1fff]
[ 1.226847] bus: 04 index 1 mmio: [0x34100000-0x351fffff]
[ 1.226851] bus: 04 index 2 mmio: [0x33100000-0x340fffff]
[ 1.226856] bus: 04 index 3 mmio: [0x0-0x0]
[ 1.226860] bus: 05 index 0 mmio: [0x0-0x0]
[ 1.226864] bus: 05 index 1 mmio: [0x0-0x0]
[ 1.226868] bus: 05 index 2 mmio: [0x0-0x0]
[ 1.226872] bus: 05 index 3 io port: [0x00-0xffff]
[ 1.226877] bus: 05 index 4 mmio: [0x000000-0xffffffff]
[ 1.226899] NET: Registered protocol family 2
[ 1.240131] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.240609] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.240713] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.240826] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.240831] TCP reno registered
[ 1.244152] NET: Registered protocol family 1
[ 1.244369] checking if image is initramfs... it is
[ 2.216723] Freeing initrd memory: 7370k freed
[ 2.216822] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 2.216828] Simple Boot Flag at 0x44 set to 0x1
[ 2.217214] cpufreq: No nForce2 chipset.
[ 2.217478] audit: initializing netlink socket (disabled)
[ 2.217516] type=2000 audit(1241513613.216:1): initialized
[ 2.231908] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.234686] VFS: Disk quotas dquot_6.5.1
[ 2.234812] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.236129] fuse init (API version 7.10)
[ 2.236320] msgmni has been set to 970
[ 2.236670] alg: No test for stdrng (krng)
[ 2.236704] io scheduler noop registered
[ 2.236709] io scheduler anticipatory registered
[ 2.236713] io scheduler deadline registered
[ 2.236752] io scheduler cfq registered (default)
[ 2.236775] pci 0000:00:02.0: Boot video device
[ 2.237388] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 2.237403] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node de813cc0), AE_ALREADY_EXISTS
[ 2.237418] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 2.238907] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 2.238920] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node de813cc0), AE_ALREADY_EXISTS
[ 2.240296] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.240356] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.240403] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 2.240423] pci_express 0000:00:1c.0cie00: allocate port service
[ 2.240456] pci_express 0000:00:1c.0cie02: allocate port service
[ 2.240483] pci_express 0000:00:1c.0cie03: allocate port service
[ 2.240580] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 2.240635] pcieport-driver 0000:00:1c.1: found MSI capability
[ 2.240676] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[ 2.240695] pci_express 0000:00:1c.1cie00: allocate port service
[ 2.240723] pci_express 0000:00:1c.1cie02: allocate port service
[ 2.240750] pci_express 0000:00:1c.1cie03: allocate port service
[ 2.240846] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 2.240901] pcieport-driver 0000:00:1c.2: found MSI capability
[ 2.240941] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[ 2.240961] pci_express 0000:00:1c.2cie00: allocate port service
[ 2.241015] pci_express 0000:00:1c.2cie02: allocate port service
[ 2.241045] pci_express 0000:00:1c.2cie03: allocate port service
[ 2.241143] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 2.241199] pcieport-driver 0000:00:1c.3: found MSI capability
[ 2.241238] pcieport-driver 0000:00:1c.3: irq 2300 for MSI/MSI-X
[ 2.241257] pci_express 0000:00:1c.3cie00: allocate port service
[ 2.241286] pci_express 0000:00:1c.3cie02: allocate port service
[ 2.241319] pci_express 0000:00:1c.3cie03: allocate port service
[ 2.241443] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.241629] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 2.241644] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node de813cc0), AE_ALREADY_EXISTS
[ 2.241937] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 2.241949] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node de813cc0), AE_ALREADY_EXISTS
[ 2.242231] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 2.242244] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node de813cc0), AE_ALREADY_EXISTS
[ 2.242525] ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 2.242537] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0._OSC] (Node de813cc0), AE_ALREADY_EXISTS
[ 2.242671] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.244016] ACPI: AC Adapter [ACAD] (on-line)
[ 2.244188] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.244336] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.244342] ACPI: Power Button (FF) [PWRF]
[ 2.244431] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.244437] ACPI: Power Button (CM) [PWRB]
[ 2.244524] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 2.245380] ACPI: Lid Switch [LID0]
[ 2.245475] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.245482] ACPI: Sleep Button (CM) [SLPB]
[ 2.246653] ACPI: SSDT 1F380C90, 0239 (r2 PmRef Cpu0Ist 3000 INTL 20051117)
[ 2.247337] ACPI: SSDT 1F37FE10, 01C7 (r2 PmRef Cpu0Cst 3001 INTL 20051117)
[ 2.248187] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.248240] processor ACPI_CPU:00: registered as cooling_device0
[ 2.248249] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.248941] ACPI: SSDT 1F380F10, 00D0 (r2 PmRef Cpu1Ist 3000 INTL 20051117)
[ 2.249607] ACPI: SSDT 1F37EF10, 0083 (r2 PmRef Cpu1Cst 3000 INTL 20051117)
[ 2.250498] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.250541] processor ACPI_CPU:01: registered as cooling_device1
[ 2.250549] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.252859] isapnp: Scanning for PnP cards...
[ 2.606660] isapnp: No Plug & Play device found
[ 2.621521] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.623416] brd: module loaded
[ 2.624090] loop: module loaded
[ 2.624244] Fixed MDIO Bus: probed
[ 2.624256] PPP generic driver version 2.4.2
[ 2.624389] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.624452] Driver 'sd' needs updating - please use bus_type methods
[ 2.624472] Driver 'sr' needs updating - please use bus_type methods
[ 2.624627] ata_piix 0000:00:1f.2: version 2.12
[ 2.624653] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.624661] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 2.624726] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.624893] scsi0 : ata_piix
[ 2.625141] scsi1 : ata_piix
[ 2.627318] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[ 2.627325] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[ 2.952539] ata2.00: CFA: SSDPAMM0008G1, Ver2.I0H, max UDMA/66
[ 2.952545] ata2.00: 15761088 sectors, multi 0: LBA
[ 2.960492] ata2.00: configured for UDMA/66
[ 2.960701] scsi 1:0:0:0: Direct-Access ATA SSDPAMM0008G1 Ver2 PQ: 0 ANSI: 5
[ 2.960913] sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors: (8.06 GB/7.51 GiB)
[ 2.960955] sd 1:0:0:0: [sda] Write Protect is off
[ 2.960961] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.961047] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.961197] sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors: (8.06 GB/7.51 GiB)
[ 2.961237] sd 1:0:0:0: [sda] Write Protect is off
[ 2.961243] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.961312] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.961321] sda: sda1 sda2 < sda5 >
[ 2.963622] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.963727] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.965224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.965267] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.965302] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.965308] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.965415] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.969344] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.969355] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.969388] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x38544400
[ 2.984021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.984172] usb usb1: configuration #1 chosen from 1 choice
[ 2.984236] hub 1-0:1.0: USB hub found
[ 2.984252] hub 1-0:1.0: 8 ports detected
[ 2.984470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.984509] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.984574] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.984588] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.984595] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.984698] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.984734] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[ 2.984892] usb usb2: configuration #1 chosen from 1 choice
[ 2.984946] hub 2-0:1.0: USB hub found
[ 2.984961] hub 2-0:1.0: 2 ports detected
[ 2.985129] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.985140] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.985147] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.985233] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.985283] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
[ 2.985432] usb usb3: configuration #1 chosen from 1 choice
[ 2.985485] hub 3-0:1.0: USB hub found
[ 2.985500] hub 3-0:1.0: 2 ports detected
[ 2.985669] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.985680] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.985687] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.985785] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.985833] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[ 2.985994] usb usb4: configuration #1 chosen from 1 choice
[ 2.986048] hub 4-0:1.0: USB hub found
[ 2.986063] hub 4-0:1.0: 2 ports detected
[ 2.986224] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.986235] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.986242] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.986334] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.986381] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
[ 2.986531] usb usb5: configuration #1 chosen from 1 choice
[ 2.986585] hub 5-0:1.0: USB hub found
[ 2.986600] hub 5-0:1.0: 2 ports detected
[ 2.986874] usbcore: registered new interface driver libusual
[ 2.986940] usbcore: registered new interface driver usbserial
[ 2.986964] USB Serial support registered for generic
[ 2.986995] usbcore: registered new interface driver usbserial_generic
[ 2.986999] usbserial: USB Serial Driver core
[ 2.987077] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 2.987432] i8042.c: Warning: Keylock active.
[ 2.996323] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.001601] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.001615] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.001622] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.001629] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.001636] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.004101] mice: PS/2 mouse device common for all mice
[ 3.024133] rtc_cmos 00:03: RTC can wake from S4
[ 3.024211] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.024255] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.024404] device-mapper: uevent: version 1.0.3
[ 3.024613] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
[ 3.024796] device-mapper: multipath: version 1.0.5 loaded
[ 3.024803] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.025026] EISA: Probing bus 0 at eisa.0
[ 3.025039] Cannot allocate resource for EISA slot 1
[ 3.025044] Cannot allocate resource for EISA slot 2
[ 3.025048] Cannot allocate resource for EISA slot 3
[ 3.025053] Cannot allocate resource for EISA slot 4
[ 3.025057] Cannot allocate resource for EISA slot 5
[ 3.025062] Cannot allocate resource for EISA slot 6
[ 3.025077] EISA: Detected 0 cards.
[ 3.025353] cpuidle: using governor ladder
[ 3.025580] cpuidle: using governor menu
[ 3.026688] TCP cubic registered
[ 3.026940] NET: Registered protocol family 10
[ 3.027800] lo: Disabled Privacy Extensions
[ 3.028494] NET: Registered protocol family 17
[ 3.028535] Bluetooth: L2CAP ver 2.11
[ 3.028539] Bluetooth: L2CAP socket layer initialized
[ 3.028544] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.028548] Bluetooth: SCO socket layer initialized
[ 3.028658] Marking TSC unstable due to TSC halts in idle
[ 3.028679] Bluetooth: RFCOMM socket layer initialized
[ 3.028692] Bluetooth: RFCOMM TTY layer initialized
[ 3.028696] Bluetooth: RFCOMM ver 1.10
[ 3.029809] Using IPI No-Shortcut mode
[ 3.029992] registered taskstats version 1
[ 3.030233] Magic number: 9:553:876
[ 3.030375] rtc_cmos 00:03: setting system clock to 2009-05-05 08:53:35 UTC (1241513615)
[ 3.030384] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.030388] EDD information not available.
[ 3.030820] Freeing unused kernel memory: 532k freed
[ 3.031140] Write protecting the kernel text: 4128k
[ 3.031250] Write protecting the kernel read-only data: 1532k
[ 3.046179] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.297037] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 3.457727] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.457769] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.457822] r8169 0000:02:00.0: setting latency timer to 64
[ 3.458058] r8169 0000:02:00.0: irq 2299 for MSI/MSI-X
[ 3.459533] eth0: RTL8102e at 0xdfd60000, 00:1e:68:b8:48:da, XID 24a00000 IRQ 2299
[ 3.467516] usb 1-5: configuration #1 chosen from 1 choice
[ 4.124560] PM: Starting manual resume from disk
[ 4.124568] PM: Resume from partition 8:5
[ 4.124572] PM: Checking hibernation image.
[ 4.125192] PM: Resume from disk failed.
[ 4.132414] kjournald starting. Commit interval 5 seconds
[ 4.132451] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.357714] udev: starting version 141
[ 6.467009] Linux agpgart interface v0.103
[ 6.491794] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 6.492132] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 6.495106] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x20000000
[ 6.513671] sdhci: Secure Digital Host Controller Interface driver
[ 6.513679] sdhci: Copyright(c) Pierre Ossman
[ 6.519164] sdhci-pci 0000:04:00.0: SDHCI controller found [197b:2382] (rev 0)
[ 6.519209] sdhci-pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.519314] sdhci-pci 0000:04:00.0: setting latency timer to 64
[ 6.519441] mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA
[ 6.519470] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 6.519507] sdhci-pci 0000:04:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.519525] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
[ 6.519543] sdhci-pci 0000:04:00.2: PCI INT A disabled
[ 6.631437] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input6
[ 6.636200] cfg80211: Using static regulatory domain info
[ 6.636208] cfg80211: Regulatory domain: US
[ 6.636214] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.636222] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 6.636229] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.636236] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.636244] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.636251] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.636258] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 6.636972] cfg80211: Calling CRDA for country: US
[ 6.685414] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
[ 6.700847] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.700872] ath5k 0000:03:00.0: setting latency timer to 64
[ 6.700991] ath5k 0000:03:00.0: registered as 'phy0'
[ 6.744241] mmc0: new high speed SDHC card at address b368
[ 6.779420] intel_rng: FWH not detected
[ 6.798909] phy0: Selected rate control algorithm 'minstrel'
[ 6.834392] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.856380] iTCO_vendor_support: vendor-support=0
[ 6.893471] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 6.893710] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[ 6.893853] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.997854] Linux video capture interface: v2.00
[ 7.000652] Registered led device: ath5k-phy0::rx
[ 7.000782] Registered led device: ath5k-phy0::tx
[ 7.000791] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 7.018514] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[ 7.020526] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input8
[ 7.040338] usbcore: registered new interface driver uvcvideo
[ 7.040350] USB Video Class driver (v0.1.0)
[ 7.139833] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 7.211038] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 7.275354] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.275472] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.404131] cfg80211: Regulatory domain changed to country: US
[ 7.404143] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.404152] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 7.404160] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 7.404167] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.404175] (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.404182] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 7.417953] mmcblk0: mmc0:b368 LEXAR 3.74 GiB
[ 7.418100] mmcblk0: p1
[ 7.743830] lp: driver loaded but no devices found
[ 7.897990] Adding 385520k swap on /dev/sda5. Priority:-1 extents:1 across:385520k
[ 8.088385] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
[ 8.142612] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 8.480612] EXT3 FS on sda1, internal journal
[ 9.658726] type=1505 audit(1241513622.126:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1999
[ 9.659014] type=1505 audit(1241513622.126:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1999
[ 9.659133] type=1505 audit(1241513622.126:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1999
[ 9.659234] type=1505 audit(1241513622.126:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1999
[ 9.975695] type=1505 audit(1241513622.442:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2004
[ 9.976152] type=1505 audit(1241513622.442:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2004
[ 10.040562] type=1505 audit(1241513622.506:8): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2008
[ 12.495406] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.495415] Bluetooth: BNEP filters: protocol multicast
[ 12.520805] Bridge firewalling registered
[ 15.430925] ppdev: user-space parallel port driver
[ 16.987503] [drm] Initialized drm 1.1.0 20060810
[ 17.004083] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.004095] pci 0000:00:02.0: setting latency timer to 64
[ 17.004482] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 17.008145] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 17.008215] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 17.531865] r8169: eth0: link down
[ 17.532064] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.562724] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.126329] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 18.569981] wlan0: authenticate with AP dcc416b8
[ 18.571496] wlan0: authenticated
[ 18.571507] wlan0: associate with AP dcc416b8
[ 18.768121] wlan0: associate with AP dcc416b8
[ 18.968115] wlan0: associate with AP dcc416b8
[ 19.168115] wlan0: association with AP dcc416b8 timed out
[ 28.798565] wlan0: authenticate with AP dcc416b8
[ 28.800645] wlan0: authenticated
[ 28.800657] wlan0: associate with AP dcc416b8
[ 28.809060] wlan0: RX AssocResp from dd22a08a (capab=0x411 status=0 aid=1)
[ 28.809070] wlan0: associated
[ 28.810581] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 30.951051] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 34.494663] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 38.956034] wlan0: no IPv6 routers present