Keyboard and RAM problem after upgrade

Discussion in 'Laptop Hardware' started by harj, Feb 7, 2009.

  1. harj

    harj

    Joined:
    Jan 16, 2009
    Messages:
    5
    Likes Received:
    0
    Can anyone help me as I really dont want to have to return this machine!!

    I followed the guides on here to disassemble the AAO and put an extra 1gb RAM in.

    First problem and the biggest problem is the top of the keyboard does not click back into place, as in the step where you have to push the three pins in to remove the keyboard, they are staying 'in' and the keyboard is loose, so annoying!! Anyone know how to fix this?!

    Second problem is the RAM did not show up after installation, this is not such a big deal as I can try again but the keyboard is!

    Anyone know how to fix this?!
     
    harj, Feb 7, 2009
    #1
  2. harj

    harj

    Joined:
    Jan 16, 2009
    Messages:
    5
    Likes Received:
    0
    Right, after taking the keyboard and the next part off, I managed to poke back through the tabs for 2/3 tabs, seems I'd pushed them in too hard! However, I can't access the tab from the back on the one above the F2 key as there is a plastic part stuck on the chassis covering it, any ideas?!
     
    harj, Feb 7, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. loose case after RAM upgrade?

  2. trackpad stopped working after ram upgrade

  3. Fewer wakeups per sec in Powertop after RAM upgrade?

  4. No boot devices after ram upgrade

  5. RAM Upgrade to 1.5gig with 'known working' RAM, however ..

  6. Acer One Died after RAM Upgrade.. need advice

  7. Boot problems after ram upgrade

  8. Dead keyboard, dead trackpad, after installing extra RAM

Loading...