memtest+ 2.10

Discussion in 'Laptop Hardware' started by bjlockie, Dec 19, 2008.

  1. bjlockie

    bjlockie

    Joined:
    Oct 21, 2008
    Messages:
    93
    Likes Received:
    0
    It crashes when I run memtest+ 2.10 :-(
    It says I have DDR 433 with 4-4-4-12 timings. :-(
    I'm not sure it is the same place but I did notice the word 'HALTING' on the screen before it reboots.
    No memory errors, it just reboots.

    I put a pic at:
    http://james.lockie.ca/test/memtest.jpg
     
    bjlockie, Dec 19, 2008
    #1
  2. bjlockie

    bjlockie

    Joined:
    Oct 21, 2008
    Messages:
    93
    Likes Received:
    0
    I think I found the problem. :)
    I had an external USB mouse connected and when I move it memtest crashes.
    I *think* the USB generates an interrupt.
    I haven't done a full memtest pass but so far so good.
    Acer really shouldn't soldered RAM on.
    They should definitely make the BIOS able to disable the onboard RAM.
     
    bjlockie, Dec 20, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. memtest 1.70 issue

  2. Acer 522 memtest trouble ?

Loading...