problem istalling xp

Discussion in 'Windows' started by simojoker, Nov 6, 2008.

  1. simojoker

    simojoker

    Joined:
    Nov 6, 2008
    Messages:
    2
    Likes Received:
    0
    i want to install xp on my aspire one 110(8gb ssd, 512 ram). I've used both microxp and tinyxp rev 09, i've create an usb executable version with usb multiboot 10, but i've always the same problem. windows installation start, load drivers but when in the bottom of screan came the "windows installation start" text always blu screen windows error.

    i've used both 1 gb and 2 gb usb stick but the same. is a broblem of driver or what?

    help me please
     
    simojoker, Nov 6, 2008
    #1
  2. simojoker

    simojoker

    Joined:
    Nov 6, 2008
    Messages:
    2
    Likes Received:
    0
    hallo, anybody have my same problem?
     
    simojoker, Nov 6, 2008
    #2
  3. simojoker

    nmesisca

    Joined:
    Oct 6, 2008
    Messages:
    318
    Likes Received:
    0
    Location:
    Ireland
    if it blue screens at the installation I doubt its a driver problem as most drivers gets loaded only after windows is installed. One exception could be the driver for the SATA disk, but since the AAO is using PATA compatible mode, I dont its that one either.
    In my opinion the shrink of XP you created could have some problems. its not unusual.
    To verify this, if you can, plug in a USB optical drive, burn the XP you have created on a DVD/CD and try installing from there. If it still gets stuck its most likely an image problem.
     
    nmesisca, Nov 6, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.