Swap touchpad for one with buttons on bottom

Discussion in 'Modding and Customization' started by solutionsville, Sep 4, 2009.

  1. solutionsville

    solutionsville

    Joined:
    Jul 5, 2009
    Messages:
    4
    Likes Received:
    0
    I was wondering if anyone has done a swap of the Touchpad with the buttons on the side for one with the buttons on the bottom.

    That is really my only complaint about my 9 inch.

    Thanks,
     
    solutionsville, Sep 4, 2009
    #1
  2. solutionsville

    CalcMan

    Joined:
    Dec 7, 2008
    Messages:
    3
    Likes Received:
    0
    Touchpad on the a150 is made of 2 hardware components, the touch area which is located in the top plastic panel and the 2 hardware buttons with are located directly on the motherboard.

    Unless you wanted to do some hardcore hardware modification your probably not going to be able to switch it.

    You would have to remove the buttons and resolder then and reform a top plastic piece for the case.
     
    CalcMan, Dec 24, 2009
    #2
  3. solutionsville

    jackluo923

    Joined:
    Aug 26, 2008
    Messages:
    843
    Likes Received:
    0
    you can go into synaptics software and map the bottom left and right into "right" and "left" CLICK
     
    jackluo923, Dec 28, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Swap partition or no swap partition?

  2. Bottom panel blocking bottom of window

  3. Fried Touchpad Buttons

  4. To Swap, Or Not To Swap - That Is The Question

  5. AAO mousepad buttons don't work but touchpad does?

  6. Touchpad buttons loosen up as you use them

  7. Touchpad/buttons Acting On Their Own

  8. Backward and middle click buttons on the touchpad

Loading...