unable to use EMESENE : no contacts appearing

Discussion in 'Linux' started by nonogm, Jan 21, 2009.

  1. nonogm

    nonogm

    Joined:
    Jan 18, 2009
    Messages:
    19
    Likes Received:
    0
    Hello

    I have been trying to use EMESENE on this AAO 150 with Limpus.

    Be it loaded and installed thru the yum-install emesene or thru the application (add softwares, search, install: it does seems completed), the application starts, opens, but amazingly no contact appears on the list. Have tried every alternative, no way.

    Does anyone encounters the same issue?

    FYI the emesene is far more reactive than any other instant messenger programm, be it on Ubuntu 8.10 or Kubuntu.

    IT is only with the Limpus distro that it seems to mis-operate properly.

    Hint, anyone???
     
    nonogm, Jan 21, 2009
    #1
  2. nonogm

    nonogm

    Joined:
    Jan 18, 2009
    Messages:
    19
    Likes Received:
    0
    allright... found the answer on another place: here it is.

    type this line in command mode :

    sed -i.bak 's/09607671-1C32-421F-A6A6-CBFAA51AB5F4/CFE80F9D-180F-4399-82AB-413F33A1FA11/g' /usr/share/emesene/emesenelib/XmlTemplates.py


    then start emesene and you can check your contacts, especially those offline: they are appearing now.
     
    nonogm, Jan 21, 2009
    #2
  3. nonogm

    kingfisher

    Joined:
    Jan 21, 2009
    Messages:
    2
    Likes Received:
    0
    emesene on linux4one does that too.

    -at the point of throwing aspire one away-
     
    kingfisher, Jan 22, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.