Upgrading my new ASUS F1704 az vivobook

Discussion in 'Acer' started by Dant3006, Feb 4, 2024.

  1. Dant3006

    Dant3006

    Joined:
    Feb 4, 2024
    Messages:
    1
    Likes Received:
    0
    I wanted to upgrade my new laptop as soon as I could. I put in new memory which was fairly easy.
    I bought a new Crucial PCIe 3.0 NVMe M.2 SSD there’s a P3 on the box as well.
    I was hoping this would be easy too but for me it is definitely not!
    I installed it and started it up and got an ASUS page with a screen to test everything and a few other things which you can save and exit but it re-starts and goes back to the same page.
    I followed some online advice and backed up everything and made the windows media installation thing but while following the directions it came to the hard drive partition part and mine only showed two partitions both say Disk 0 and won’t let me do anything with them.
    I’m lost on what to do next.
    Any help would be appreciated.
    Thanks
    Dan
     
    Dant3006, Feb 4, 2024
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.