USB Speakers

Discussion in 'Linux' started by diceman99, Feb 17, 2009.

  1. diceman99

    diceman99

    Joined:
    Feb 8, 2009
    Messages:
    6
    Likes Received:
    0
    Hi,

    Using my aao as a replacement ipod. Speakers were a little bit soft so i bought some usb powered speakers.
    It turns out that the usb cable provides the power and the audio. My problem is tat i dont know how to "load" the usb drivers.
    dmesg reports the following once I plug the speakers in.

    usb 2-1: new full speed USB device using uhci_hcd and address 2
    usb 2-1: device descriptor read/64, error -71
    usb 2-1: device descriptor read/64, error -71
    usb 2-1: new full speed USB device using uhci_hcd and address 3
    usb 2-1: device descriptor read/64, error -71
    usb 2-1: device descriptor read/64, error -71
    usb 2-1: new full speed USB device using uhci_hcd and address 4
    usb 2-1: device not accepting address 4, error -71
    usb 2-1: new full speed USB device using uhci_hcd and address 5
    usb 2-1: device not accepting address 5, error -71


    any help appreciated
     
    diceman99, Feb 17, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Speakers not disabled when connecting headphones

  2. USB Speakers [FAILURE]

  3. Headphone jack works, speakers don't

  4. USB Speakers

  5. Route Mic-in to internal speakers?

  6. External USB speakers for AAO A110b Netbook

  7. Clicking Sound from speakers

  8. USB Speakers

Loading...