Video RAM hack?

Discussion in 'Modding and Customization' started by Omega_red, Nov 23, 2009.

  1. Omega_red

    Omega_red

    Joined:
    Nov 20, 2009
    Messages:
    13
    Likes Received:
    0
    I was going thru the ZG5 schematic.. it seems as if the bios sets up the video amount of video ram.
    In other words it uses shared system ram, so it should be possible change this to 16 MB or even higher... some how....

    Any idea's?
     
    Omega_red, Nov 23, 2009
    #1
  2. Omega_red

    DutchDK

    Joined:
    Jun 2, 2009
    Messages:
    338
    Likes Received:
    0
    Location:
    Copenhagen
    Not necessary at all.

    Read this thread for an explanation :

    viewtopic.php?f=56&t=18757
     
    DutchDK, Nov 25, 2009
    #2
  3. Omega_red

    Omega_red

    Joined:
    Nov 20, 2009
    Messages:
    13
    Likes Received:
    0
    Thanx for your answer.

    :similar topic
    Would adding a Broadcom BCM70012 video accelerator Increase 3d graphics prefomance?
    or is this just for video decoding "already tried google"
     
    Omega_red, Nov 25, 2009
    #3
  4. Omega_red

    hartleyshc

    Joined:
    Nov 24, 2009
    Messages:
    95
    Likes Received:
    0
    No 3d enhancements. The Broadcom card is used only for h.264 decoding. It is also supported in the upcoming version of Flash 10.1 with hardware acceleration. Finally, well playing flash video on a netbook.
     
    hartleyshc, Nov 27, 2009
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.