will not power on

Discussion in 'Acer Aspire One' started by tlkicker, Dec 8, 2009.

  1. tlkicker

    tlkicker

    Joined:
    Dec 8, 2009
    Messages:
    1
    Likes Received:
    0
    will not power on- no light on power button. any suggestions?
     
    tlkicker, Dec 8, 2009
    #1
  2. tlkicker

    jerryt

    Joined:
    Jan 5, 2009
    Messages:
    839
    Likes Received:
    0
    Remove the battery, hold the power button down for 30 seconds. Check the battery for charge. try again.
     
    jerryt, Dec 8, 2009
    #2
  3. tlkicker

    Rich in ILM

    Joined:
    Nov 3, 2008
    Messages:
    187
    Likes Received:
    0

    This set of instructions is for the AOA150 a differrent bios may apply for your model:
    http://support.acer-euro.com/drivers/downloads_gd.html

    Acer Aspire One BIOS Recovery
    The AA1 has a built-in BIOS recovery routine, making it possible to flash the BIOS even if the system doesn't boot anymore. It's only meant for emergencies and may void your warranty, so use at your own risk.

    Follow every step carefully!

    First format an USB stick with FAT.

    Download the latest BIOS, and put both FLASHIT.EXE and the BIOS file in the root directory of the stick. Rename the BIOS file to ZG5IA32.FD, that's important. Do not remove the USB stick.

    Turn the AA1 off, make sure both battery and AC adapter are connected. Press Fn+Esc, keep it pressed and press the power button to turn the AA1 on. Release Fn+Esc after a few seconds, the power button will be blinking. Press the power button once. The AA1 will now initiate the BIOS flash, do not interrupt it under any circumstances. After a while the power button will stop blinking, and the AA1 will reboot shortly after. Wait patiently.

    The BIOS has been flashed and all settings reset to default.

    If for some reason you made a mistake during the procedure and it doesn't reboot by itself wait 5 minutes before turning it off, just to be safe that it isn't still flashing the BIOS.
     
    Rich in ILM, Dec 8, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.