Win7 Install via DVD Drive

Discussion in 'Windows' started by zermattbusby, May 5, 2009.

  1. zermattbusby

    zermattbusby

    Joined:
    Sep 9, 2008
    Messages:
    14
    Likes Received:
    0
    Hi... Downloaded W7 RC and burnt to DVD no probs. However not sure regards the actual install, any chance some kind sole would write me a step by step guide using a DVD Drive on to a AAO150 1GB 120GB (not sure when it comes to deleting partitions etc)

    PS Linux is currently installed, would like to replace this with W7

    Many thanks.
     
    zermattbusby, May 5, 2009
    #1
  2. zermattbusby

    Tamrac

    Joined:
    Sep 20, 2008
    Messages:
    612
    Likes Received:
    0
    just boot from the dvd drive via the boot menu f12... then on the win7 install just select to remove the existing partition, and format the drive to ntfs. It's pretty str8 forward, and I you should not have any problems at all. ;)

    On the chance that you will not have wifi after setup, use wired LAN to do a windows update. It will install the drivers for the wifi card. Good luck. :)
     
    Tamrac, May 5, 2009
    #2
  3. zermattbusby

    zermattbusby

    Joined:
    Sep 9, 2008
    Messages:
    14
    Likes Received:
    0
    Ahh... Thanks Tamrac ! will have me tea then give it a go, lol
     
    zermattbusby, May 5, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.