WPA enterprise TKI

well after looking for this forum and around google i can't manage to connect my university network...
i follow a thread for WPA & WPA2 enterprise but with no luck,

the settings from my university linux group are

ctrl_interface=/var/run/wpa_supplicant

eapol_version=1
ap_scan=1
fast_reauth=1

network={
ssid="eduroam"
scan_ssid=1
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
phase2="auth=MSCHAPv2"
identity="[email protected]" # substitute with your credentials
password="**********" # access credentials
}

i tried put this under the network manager but with no luck....

so any help will be apreciated...

 

Have you upgraded your NetworkManager? The default one doesn't support WPA Enterprise. See : viewtopic.php?f=34&t=1028&p=11346#p11346

 

yahp i followed that thread to get WPA enterprise...

 

OK, so on the config for eduroam in networkmanager you should now have on the security tab:

Security: WPA & WPA2 Enterprise
Authentication: Protected EAP (PEAP)
Anonymous identity: (leave blank)
CA Certificate: (none)
PEAP Version: Version 0
Inner Authentication: MSCHAPv2

And your user name and password. Try changing the PEAP version to 1 if 0 doesn't work. Mine sometimes takes a few tries to connect on a network with almost the same settings, so give it a few goes with each PEAP version.

 

well before anything thanks for your help...

But i tried a more few times with no luck and about the CA-CERTIFICATE it is GTE-GLOBAL-ROOT
as you can see in this link it works under ubunto -> http://glua.ua.pt/NetworkManager#EDUROAM

it also doesn't detect the file cert.pem under /etc/pki/tls/cert.pem

so i my think that this is a problem of certificates than anything else...

 

hmmm, perhaps that is it, try grabbing the root cert from here -> http://secure.globalsign.net/cacert/ct_root.pem , save it and then point the network manager to that location.